March 8, 2019 Pound Pool Plastering 0

We all make mistakes when it comes to maintaining our homes and our pools are not exempt.  When caring for your pool a simple mistake while adding chemicals can take the pool out of commission for weeks.  Unfortunatly however, mistakes in maintaining your pool occur both big and small.

Large mistakes in caring for your swimming pool turn into valuable lessons to learn.  Pool maintenance education is imperative to prevent mistakes and in turn your pool is safer, cleaner, and more efficient without extra frustration on your end.

One of the biggest mistakes pool owners make is with the addition of a chemical commonly referred to as pool shock, a large dosage of chlorine. When dosages of chlorine are too high your pool water will essentially bleach out the color of your clothing.  Although you technically can’t over-shock the pool it can cause issues with more than your clothing.  Too much chlorine can lead to pitted plaster, vinyl liner discoloration, or brittle tile pieces breaking off.

One way to ensure this doesn’t occur is to dissolve the shock chemicals in a bucket of water prior to shocking the pool.  This allows the shock chemical to disperse more evenly throughout the water and in turn protects the pools finish.  As a norm, in pool maintenance a good rule to follow is to dissolve chemicals thoroughly before adding it to the pools water.

Another common mistake when owning a pool that homeowners make is that they don’t take the necessary time or care when brushing and vacuuming your pool.   A good brushing pushes the build up out into the water and settles on the bottom of the pool and then can be vacuumed up. Take the time to brush behind all those hard to reach places like pool ladders, steps, and stairs.  Corners, crevices, and water lines especially in plaster pools should be scrubbed really well.

Pool chemicals are a huge source of the mistakes made by homeowners when caring for their pool.  Your pools plaster can literally be destroyed if the chemicals in the water are not properly balanced.  Don’t ignore your pools pH and alkalinity levels.  A low pH indicates acidity and a high pH indicates alkalinity, too much of either one is bad for your pools plaster. Too low of a pH can damage the equipment used in the pool such as a pool pump and filter, plaster or vinyl linings, heaters, automatic pool cleaners and more.  Proper water chemical balance in a pool is easily accomplished by testing your pools water on a regular basis and making adjustments as needed.

Pound Pool Plastering offers several options when it comes to servicing your pool including plaster, caulk, tiling, cement decks, plumbing, and coping in both commercial and residential settings.  More information can be found at http://www.pound-pool-plastering.com/.