June 12, 2018 Reynolds Water 0

A salt-free water softener uses potassium chloride instead of salt, so you will not experience salty water, or the salt build up that can occur inside the tank of your water softener.  There are many other positive benefits of using a potassium chloride water softener, but you will only see them if you maintain it properly.

One of the things that you will need to keep track of is how much potassium chloride you have inside your brine tank.  The potassium chloride should be at least three inches above the water line at all times, although you may find that you can keep less in there if you find a residue on the sides.  It is a good idea to check your levels every couple of weeks at first, until you know how much potassium chloride you are using.

Your valves are a necessary component of your potassium chloride water softener, and you will want to turn them from one position to the other and back again once a month.  This will ensure that they will turn easily when you need to cut off the water supply to your softener.  This is also the time to clean the valve between the brine tank and the resin tank.  To clean that valve, you will need to disassemble it first, but make sure that you relieve the water pressure before taking anything apart.  If you notice that any of these valves are leaking, this would be the best time to replace the washers or seals.

The resin in your potassium chloride water softener is what helps soften your water, and you will want to keep it functioning properly.  A water softener cleaner can be added every few months prior to a regeneration to keep the resin in optimal form.

New potassium chloride softeners do not need to be cleaned often, but they can benefit from an annual cleaning and so can your homes water.  To clean your potassium chloride water softener, you will need to close off the water intake and take all the water out of the tank.  Then you will remove all the potassium chloride and scrub the inside of the brine tank with hot soapy water.  After the tank has been thoroughly rinsed out, you should sanitize the tank with a mixture of water and bleach.

Keeping this maintenance schedule will allow your potassium chloride water softener to continue working for many years, as it provides you with softer water.

At Reynolds Water Conditioning Company, we are here to help make sure our clients don’t buy water treatment systems that they don’t need.  We are here to make sure you find a water softening system that gives you the results you are looking for, whether it is to remove iron or odor from you water; we have a solution that will help!  For more information contact our experts at 800.572.9575 or at our website https://reynoldswater.com.